Troubleshooting Navionics Charts in Raymarine C-Classic Plotters

1. Make sure the unit has the most up-to-date software version (to verify what this is visit www.raymarine.com).
If your unit requires a software update, please do not use the Navionics chart to download the software or have the Navionics chip inside the unit when the software is being updated as this will corrupt the Navionics chart and render the card useless.
   a. Software versions are viewed in the lower right hand corner when the unit is first powered on.
      i. Press MENU button once, scroll to SYSTEM DIAGNOSTICS, scroll to SOFTWARE SERVICES, scroll to
         UNIT INFO and the software version will be displayed. – it is the APP VERSION #.
2. Make sure the DECLUTTER feature is turned OFF on all units. PRESENTATION softkey – DECLUTTER on or off

Steps to make sure unit has all features turned on

1. Press the MENU button once, scroll to CARTO SETUP
   a. CHART DISPLAY – DETAILED (EXTRA DETAILED will cause the unit to have too much clutter – should be
       used only in situations where chart must be zoomed in closely)
   b. CHART TEXT – ON
   c. CHART BOUNDARIES – ON
   d. SPOT SOUNDING – ON
      i. SAFETY CONTOUR – OFF, 7FT, 10FT, 16FT, 20FT, 33FT or 66FT (this will change where the blue colorization
         of the water starts)
   e. DEPTH CONTOUR – ALL, OFF, 16FT, 20FT, 33FT or 66FT
   f. NAV MARKS – ON
   g. LIGHT SECTORS – ON
   h. CAUTION & ROUTING DATA – ON
   i. MARINE FEATURES – ON
   j. LAND FEATURES – ON
   k. COLORED SEABED AREAS – ON    l. ROADS – ON
   m. ADDITIONAL WRECKS – ON
2. To remove CF Card:
   a. Press the MENU button once
   b. Scroll to REMOVE CF CARD
Please note that if this step is not done to remove the CF card, unless the unit is turned off, this could cause damage to the CF card.