Troubleshooting Navionics Charts in Raymarine C Wide & E Wide,
E Classic, A50 & A70 Plotters

Some units may need to have the unit turned off and on with the Platinum products in the unit.

1. Make sure the unit has the most up-to-date software version (to verify what this is visit www.raymarine.com).
If your unit requires a software update, please do not use the Navionics chart to download the software or have the Navionics chip inside the unit when the software is being updated as this will corrupt the Navionics chart and render the card useless.
   a. Software versions are viewed in the lower right hand corner when the unit is first powered on.
      i. Press MENU button once, scroll to SYSTEM DIAGNOSTICS, scroll to SOFTWARE SERVICES,
         scroll to UNIT INFO and the software version will be displayed. – it is the APP VERSION #.
2. Make sure the DECLUTTER feature is turned OFF on all units. PRESENTATION softkey – DECLUTTER on or off

Steps to make sure unit has all features turned on

1. Press the MENU button once, scroll to CARTO SETUP
   a. CHART DISPLAY – DETAILED (EXTRA DETAILED will cause the unit to have too much clutter – should be
       used only in situations where chart must be zoomed in closely)
   b. CHART TEXT – ON
   c. CHART BOUNDARIES – ON
   d. SPOT SOUNDING – ON
      i. SAFETY CONTOUR – OFF, 7FT, 10FT, 16FT, 20FT, 33FT or 66FT (this will change where the blue colorization
         of the water starts)
   e. DEPTH CONTOUR – ALL, OFF, 16FT, 20FT, 33FT or 66FT
   f. NAV MARKS – ON
   g. LIGHT SECTORS – ON
   h. CAUTION & ROUTING DATA – ON
   i. MARINE FEATURES – ON
   j. LAND FEATURES – ON
   k. COLORED SEABED AREAS – ON    l. ROADS – ON
   m. ADDITIONAL WRECKS – ON
   n. BUSINESS SERVICES – ON
   o. ARIAL PHOTO OVERLAY – ON
2. To remove CF Card:
   a. Press the MENU button once
   b. Scroll to REMOVE CF CARD
Please note that if this step is not done to remove the CF card, unless the unit is turned off, this could cause damage to the CF card.

PLATINUM QUICKSTART SHORTCUTS

1. 3D View & 3D/2D Split Screen - 1 mile inland 3 miles offshore
   a. Press PAGE button and appropriate softkey for CHART/3D VIEW (If customer does not have appropriate softkey
       setup at the bottom of the screen, press MENU, scroll to SELECT PAGE SET and select the right arrow button to
       select the CHART function).
   b. Select PRESENTATION, CHART MODE & ORIENTATION, CHART SYNC, select 3D
   c. Press ACTIVE to highlight 3D window, press MENU, 3D CHART SETUP, select desired viewing preferences.
   d. With 3D window active, adjust viewing preference w/rotary knob and softkeys at bottom of display.    e. To adjust 3D
       exaggeration in 3D window, select PRESENTATION, 3D VIEW OPTIONS, ADJUST EXAGGERATION and
       turn rotary knob
2. Aerial Photo Overlay - 1 mile inland 3 miles offshore
   a. Press MENU select CARTOGRAPHY SETUP, AERIAL PHOTO OVERLAY to change from LAND AND
       SEA or LAND ONLY
   b. Select PRESENTATION, CHART LAYERS, AERIAL OVERLAY, ON
   c. Turn rotary knob to adjust photo layer opacity
3. Panoramic Photos
   a. Put cursor over camera icon – appears at zoom levels less than 3NM
   b. Press OK, select VIEW PHOTO softkey or scroll to right screen and highlight Navionics/Charts/Image and press OK
       button
       OR
   a. Put cursor over the port symbol – appears at zoom levels less than 3NM
   b. Press OK and then select PHOTOS option. Select photo # and press VIEW PHOTO softkey
4. Port Information & Pilot Books
   a. Put cursor over the port symbol – appears at zoom levels less than 3NM
   b. Press OK to display PORT INFORMATION menu
   c. Use ARROWs to select and view port information